Skip to product information
1 of 2


Pintle Hook Combination 6t Truck

Pintle Hook Combination 6t Truck


6t Pintle Hook – 3.5t Ball Combination Pintle Hook

Truck pintle hook combination, low wear. CRN 47056 – Approved by D.O.T. Canberra for D-Value 26.7 kN

Pintle’s tow, however, they must be ADR Approved. It is almost impossible to cause wear on the tow ball when using a ring coupling on this type of pintle hitch

This heavy-duty, combination low wear truck pintle prohibits damage to the tow ball when towing with a 75mm ring coupling.

A larger 70mm ball version will soon be available here.


Select the correct pintle from our D-Value sheet. Example, kN of Pintle Hook correctly matches your vehicle and trailer.

Some pintles are loose-fitting, create noise and wear.


  • CRN 47056.
  • D-Value 26.7kN
  • Suits standard four-hole pintle hook tow mounts – 85mm x 45mm.
  • 4 x high tensile bolts and nuts included.
  • 3″ Ring is the internal ID.
  • 41.5mm ring Thickness.
  • Low wear truck pintle

Safety is the most significant issue concerning the pintle hitch and receiver. If you have experienced wear to your tow ball from pulling consistently with a ring coupling, then this pintle hook will suit you.

The success of this design is in the casting. The ring coupler cannot get close to the ball to cause wear. The ring pulls on a higher rated surface in the cast and creates no noise from wear or slack


Weight 8 kg
Dimensions 25 × 20 × 18 cm
View full details